SM Diamond Cure & Seal - 5 Gal.
DIAMOND PLUS ANTI-SPALL WBTM
VOC Compliant, Anti-spall Protective
Penetrating, High Solids Water Based
Concrete, Pavers, Stone and Masonry
Cure and Seal
Description
DIAMOND PLUS ANTI-SPALL WB is a VOC compliant, penetrating membrane forming curing and anti-spall penetrating
water repellent sealer for concrete, pavers, stone, and masonry. It produces a protective, continuous, glossy film
which has great UV resistance. Applied to fresh concrete, Diamond Plus Anti-Spall WBTM produces a clear, continuous
film, which effectively cures fresh concrete and provide a tough protective penetrating anti-spall film that enhances
the surface colors. Diamond Plus Anti-Spall WBTM is unique because, in addition to being an effective film forming
curing and sealing compound, it contains a special water repellent which penetrates the fresh concrete and provides
long term anti-spall protection for the concrete. Diamond Plus Anti-Spall WBTM can be applied to fresh concrete to
cure to ASTM C-309 standards. Unlike other curing compounds, Diamond Plus Anti-Spall WBTM penetrates, into the
pores of the concrete and forms a diamond like gel that meets the chloride ion restrictions of NCHRP 244 to reduce
the penetration of water, salts and deicing chemicals. Diamond Plus Anti-Spall WBTM performs with three different
binders. The first hardens the films surface like microscopic diamonds, fills the capillary pores and chemically anchors
the film to the surface. The second penetrates the surface and provides color enhancement, anti-spall barrier for long
term protection from deicing salts, and water damage. The third provides curing and protection from staining.
Primary Applications
• Curing, sealing and Anti-Spall concrete where a glossy finish and Best Protection is desired
• DRIVEWAYS, SIDEWALKS, SLABES, PATIO, STONE, BRICK, MASONRY, WALLS,
Features/Benefits
• Very low odor • Excellent cure and durable seal
• Anti-Spall • Perfect for interior or exterior projects
• Use on Pavers, Concrete, Stone, Masonry
Technical Information
Material Properties @75°F (24°C) 50% RH
Packaging
DIAMOND PLUS ANTI-SPALL WB is packaged in 5 gallon pails (18.9L) and 1 gallon (3.79L) containers.
Shelf Life
1 year in original unopened container.
Specification/ Compliances
ASTM C 309, TYPE 1, 1D & II CLASS A and B AASHTO M 148 TYPE 1 & 1D CLASS A & B
ASTM C 1315 TYPE 1, 1D & II CLASS A USDA COMPLIANT
ASTM D 523 GLOOS 80 NCHRP 244 SERIES II & IV
ASTM D 2801 LEVELING ASTM D 3153 RECOAT ABILITY
Property Result
Viscosity 40 to 100 cp
Solids content ASTM D 2369 37%
VOC content 88 g/L
Water retention ASTM C 156 < 0.40 kg/m2
Initial dry time 1 hour
Recoat time 2 to 4 hours
CURING & SEALING DIAMOND PLUS ANTI-SPALL WB MASTER FORMAT 03 39 23
Coverage
Application ft2/gal (m2/L)
Cure/seal new concrete 200 to 300 (4.9 to 7.4)
Seal/dustproof old concrete 300 to 400 (7.4 to 9.8)
NCHRP 244/ASTM 309 150 (3.7)
The coverage rates are approximate and for estimating purposes only. Make test applications on actual surfaces to determine exact
coverage rates. Heavy applications, application in cool, cold, or humid conditions, or prolonged exposure to moisture may cause
DIAMOND PLUS ANTI-SPALL WB to be milky-white appearance. Follow all application instructions carefully.
Directions for Use
Surface Preparation, Existing Concrete: Surface must be structurally sound, clean, free of dust, dirt, laitance, efflorescence,
curing compound, paint, oil, grease and other contaminants. Prior to application, surface defects, voids, cracks and joints
should be properly treated and repaired. Concrete may be damp, but must be free of standing water. If acid has been
used to clean the surface, neutralize the surface prior to using DIAMOND PLUS ANTI-SPALL WB. Always test surface pH to
insure all acid has been neutralized prior to application.
Freshly Placed Concrete: Horizontal surfaces must be finished and show no surface “sheen” from bleed water.
Mixing: DIAMOND PLUS ANTI-SPALL WB requires stirring or agitation prior to use. Thoroughly mix
Diamond Plus Anti-Spall WBTM before applying or loading into application equipment.
Application: Apply DIAMOND PLUS ANTI-SPALL WB in an even, continuous film by sprayer, short-napped roller or brush.
Use an applicator pad or roller to pick up puddles or excess material from the surface. For a more uniform appearance,
especially over decorative concrete, it is recommended to back-roll the product after spraying. A second coat may be
applied depending upon the desired surface gloss. When applying to fresh concrete, a delay of 24 hours is recommended
before application of the second coat. If the delay between the first and second coat results in the contamination of the
surface, the surface must be thoroughly cleaned before the application of the second coat. When using DIAMOND PLUS
ANTI-SPALL WB to seal existing concrete, a second coat may be applied as soon as the first coat has dried 2 to 4 hours at
75°F (24°C). The surface porosity and the amount of surface sheen desired determines the selection of material for the
second coat. The sealed concrete can usually be opened to foot traffic in 8 to 12 hours, with maximum sealer durability
developed within 7 to 10 days. A light maintenance coat is recommended every 1 to 2 years depending on the concrete’s
exposure to traffic, abrasion, weathering, etc.
If using Sprayer: Strain material with a filter sock while pouring into spray unit. Water based materials splash and dry
on the bottom of the closed pail lid and fall back into the liquid and may clog spray tip if not strained.
Clean-Up
Clean up tools and equipment, overspray and drips with hot, soapy water. Dried product is very difficult to remove.
Precautions/Limitations
• DIAMOND PLUS ANTI-SPALL WB meets the tile adhesive bond requirements of ASTM 1315. However, an on-site
test is recommended to verify that the specific adhesives to be used on a project will adequately bond to DIAMOND
PLUS ANTI-SPALL WB.
• Store between 50°F - 90°F (10°C - 32°C). Do not allow to freeze.
• Application temperature range is 45° - 95°F (7° - 35°C).
• Do not apply DIAMOND PLUS ANTI-SPALL WB to frost-filled or frozen surfaces.
• Heavy applications, applying in cool or cold weather, or prolonged exposure to moisture may cause this product to
have a milky appearance.
• High humidity conditions and very hot/windy days will adversely affect drying and performance of this product.
• Do not apply if rain or heavy fog is likely within 8 to 12 hours after application.
• Before applying DIAMOND PLUS ANTI-SPALL WB to the entire surface, test a small area to verify appearance on the
substrate.
• Do not use on glazed surfaces or over ceramic tile.
• The sealer may slightly darken the surface and highlight surface imperfections.
• In all cases, consult the Safety Data Sheet before use. WARRANTY: STONE MOUNTAIN CONCRETE SOLUTIONS, LLC (“SMCS”) solely and expressly warrants that its products shall be free from defects in materials and workmanship for one (1) year from the date of purchase.
Unless authorized in writing by an officer of SMCS, no other representations or statements made by SMCS or its representatives, in writing or orally, shall alter this warranty. SMCS MAKES NO WARRANTIES, IMPLIED OR
OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. If any SMCS product fails to conform with this warranty, SMCS will replace
the product at no cost to Buyer. Replacement of any product shall be the sole and exclusive remedy available and buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made within
one (1) year from the date of the claimed breach. SMCS does not authorize anyone on its behalf to make any written or oral statements which in any way alter SMCS’s installation information or instructions in its product
literature or on its packaging labels. Any installation of SMCS products which fails to conform with such installation information or instructions shall void this warranty. Product demonstrations, if any, are done for illustrative
purposes only and do not constitute a warranty or warranty alteration of any kind. Buyer shall be solely responsible for determining the suitability of SMCS’s products for the Buyer’s intended purposes.
DIAMOND PLUS ANTI-SPALL WBTM
VOC Compliant, Anti-spall Protective
Penetrating, High Solids Water Based
Concrete, Pavers, Stone and Masonry
Cure and Seal
Description
DIAMOND PLUS ANTI-SPALL WB is a VOC compliant, penetrating membrane forming curing and anti-spall penetrating
water repellent sealer for concrete, pavers, stone, and masonry. It produces a protective, continuous, glossy film
which has great UV resistance. Applied to fresh concrete, Diamond Plus Anti-Spall WBTM produces a clear, continuous
film, which effectively cures fresh concrete and provide a tough protective penetrating anti-spall film that enhances
the surface colors. Diamond Plus Anti-Spall WBTM is unique because, in addition to being an effective film forming
curing and sealing compound, it contains a special water repellent which penetrates the fresh concrete and provides
long term anti-spall protection for the concrete. Diamond Plus Anti-Spall WBTM can be applied to fresh concrete to
cure to ASTM C-309 standards. Unlike other curing compounds, Diamond Plus Anti-Spall WBTM penetrates, into the
pores of the concrete and forms a diamond like gel that meets the chloride ion restrictions of NCHRP 244 to reduce
the penetration of water, salts and deicing chemicals. Diamond Plus Anti-Spall WBTM performs with three different
binders. The first hardens the films surface like microscopic diamonds, fills the capillary pores and chemically anchors
the film to the surface. The second penetrates the surface and provides color enhancement, anti-spall barrier for long
term protection from deicing salts, and water damage. The third provides curing and protection from staining.
Primary Applications
• Curing, sealing and Anti-Spall concrete where a glossy finish and Best Protection is desired
• DRIVEWAYS, SIDEWALKS, SLABES, PATIO, STONE, BRICK, MASONRY, WALLS,
Features/Benefits
• Very low odor • Excellent cure and durable seal
• Anti-Spall • Perfect for interior or exterior projects
• Use on Pavers, Concrete, Stone, Masonry
Technical Information
Material Properties @75°F (24°C) 50% RH
Packaging
DIAMOND PLUS ANTI-SPALL WB is packaged in 5 gallon pails (18.9L) and 1 gallon (3.79L) containers.
Shelf Life
1 year in original unopened container.
Specification/ Compliances
ASTM C 309, TYPE 1, 1D & II CLASS A and B AASHTO M 148 TYPE 1 & 1D CLASS A & B
ASTM C 1315 TYPE 1, 1D & II CLASS A USDA COMPLIANT
ASTM D 523 GLOOS 80 NCHRP 244 SERIES II & IV
ASTM D 2801 LEVELING ASTM D 3153 RECOAT ABILITY
Property Result
Viscosity 40 to 100 cp
Solids content ASTM D 2369 37%
VOC content 88 g/L
Water retention ASTM C 156 < 0.40 kg/m2
Initial dry time 1 hour
Recoat time 2 to 4 hours
CURING & SEALING DIAMOND PLUS ANTI-SPALL WB MASTER FORMAT 03 39 23
Coverage
Application ft2/gal (m2/L)
Cure/seal new concrete 200 to 300 (4.9 to 7.4)
Seal/dustproof old concrete 300 to 400 (7.4 to 9.8)
NCHRP 244/ASTM 309 150 (3.7)
The coverage rates are approximate and for estimating purposes only. Make test applications on actual surfaces to determine exact
coverage rates. Heavy applications, application in cool, cold, or humid conditions, or prolonged exposure to moisture may cause
DIAMOND PLUS ANTI-SPALL WB to be milky-white appearance. Follow all application instructions carefully.
Directions for Use
Surface Preparation, Existing Concrete: Surface must be structurally sound, clean, free of dust, dirt, laitance, efflorescence,
curing compound, paint, oil, grease and other contaminants. Prior to application, surface defects, voids, cracks and joints
should be properly treated and repaired. Concrete may be damp, but must be free of standing water. If acid has been
used to clean the surface, neutralize the surface prior to using DIAMOND PLUS ANTI-SPALL WB. Always test surface pH to
insure all acid has been neutralized prior to application.
Freshly Placed Concrete: Horizontal surfaces must be finished and show no surface “sheen” from bleed water.
Mixing: DIAMOND PLUS ANTI-SPALL WB requires stirring or agitation prior to use. Thoroughly mix
Diamond Plus Anti-Spall WBTM before applying or loading into application equipment.
Application: Apply DIAMOND PLUS ANTI-SPALL WB in an even, continuous film by sprayer, short-napped roller or brush.
Use an applicator pad or roller to pick up puddles or excess material from the surface. For a more uniform appearance,
especially over decorative concrete, it is recommended to back-roll the product after spraying. A second coat may be
applied depending upon the desired surface gloss. When applying to fresh concrete, a delay of 24 hours is recommended
before application of the second coat. If the delay between the first and second coat results in the contamination of the
surface, the surface must be thoroughly cleaned before the application of the second coat. When using DIAMOND PLUS
ANTI-SPALL WB to seal existing concrete, a second coat may be applied as soon as the first coat has dried 2 to 4 hours at
75°F (24°C). The surface porosity and the amount of surface sheen desired determines the selection of material for the
second coat. The sealed concrete can usually be opened to foot traffic in 8 to 12 hours, with maximum sealer durability
developed within 7 to 10 days. A light maintenance coat is recommended every 1 to 2 years depending on the concrete’s
exposure to traffic, abrasion, weathering, etc.
If using Sprayer: Strain material with a filter sock while pouring into spray unit. Water based materials splash and dry
on the bottom of the closed pail lid and fall back into the liquid and may clog spray tip if not strained.
Clean-Up
Clean up tools and equipment, overspray and drips with hot, soapy water. Dried product is very difficult to remove.
Precautions/Limitations
• DIAMOND PLUS ANTI-SPALL WB meets the tile adhesive bond requirements of ASTM 1315. However, an on-site
test is recommended to verify that the specific adhesives to be used on a project will adequately bond to DIAMOND
PLUS ANTI-SPALL WB.
• Store between 50°F - 90°F (10°C - 32°C). Do not allow to freeze.
• Application temperature range is 45° - 95°F (7° - 35°C).
• Do not apply DIAMOND PLUS ANTI-SPALL WB to frost-filled or frozen surfaces.
• Heavy applications, applying in cool or cold weather, or prolonged exposure to moisture may cause this product to
have a milky appearance.
• High humidity conditions and very hot/windy days will adversely affect drying and performance of this product.
• Do not apply if rain or heavy fog is likely within 8 to 12 hours after application.
• Before applying DIAMOND PLUS ANTI-SPALL WB to the entire surface, test a small area to verify appearance on the
substrate.
• Do not use on glazed surfaces or over ceramic tile.
• The sealer may slightly darken the surface and highlight surface imperfections.
• In all cases, consult the Safety Data Sheet before use. WARRANTY: STONE MOUNTAIN CONCRETE SOLUTIONS, LLC (“SMCS”) solely and expressly warrants that its products shall be free from defects in materials and workmanship for one (1) year from the date of purchase.
Unless authorized in writing by an officer of SMCS, no other representations or statements made by SMCS or its representatives, in writing or orally, shall alter this warranty. SMCS MAKES NO WARRANTIES, IMPLIED OR
OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. If any SMCS product fails to conform with this warranty, SMCS will replace
the product at no cost to Buyer. Replacement of any product shall be the sole and exclusive remedy available and buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made within
one (1) year from the date of the claimed breach. SMCS does not authorize anyone on its behalf to make any written or oral statements which in any way alter SMCS’s installation information or instructions in its product
literature or on its packaging labels. Any installation of SMCS products which fails to conform with such installation information or instructions shall void this warranty. Product demonstrations, if any, are done for illustrative
purposes only and do not constitute a warranty or warranty alteration of any kind. Buyer shall be solely responsible for determining the suitability of SMCS’s products for the Buyer’s intended purposes.
DIAMOND PLUS ANTI-SPALL WBTM
VOC Compliant, Anti-spall Protective
Penetrating, High Solids Water Based
Concrete, Pavers, Stone and Masonry
Cure and Seal
Description
DIAMOND PLUS ANTI-SPALL WB is a VOC compliant, penetrating membrane forming curing and anti-spall penetrating
water repellent sealer for concrete, pavers, stone, and masonry. It produces a protective, continuous, glossy film
which has great UV resistance. Applied to fresh concrete, Diamond Plus Anti-Spall WBTM produces a clear, continuous
film, which effectively cures fresh concrete and provide a tough protective penetrating anti-spall film that enhances
the surface colors. Diamond Plus Anti-Spall WBTM is unique because, in addition to being an effective film forming
curing and sealing compound, it contains a special water repellent which penetrates the fresh concrete and provides
long term anti-spall protection for the concrete. Diamond Plus Anti-Spall WBTM can be applied to fresh concrete to
cure to ASTM C-309 standards. Unlike other curing compounds, Diamond Plus Anti-Spall WBTM penetrates, into the
pores of the concrete and forms a diamond like gel that meets the chloride ion restrictions of NCHRP 244 to reduce
the penetration of water, salts and deicing chemicals. Diamond Plus Anti-Spall WBTM performs with three different
binders. The first hardens the films surface like microscopic diamonds, fills the capillary pores and chemically anchors
the film to the surface. The second penetrates the surface and provides color enhancement, anti-spall barrier for long
term protection from deicing salts, and water damage. The third provides curing and protection from staining.
Primary Applications
• Curing, sealing and Anti-Spall concrete where a glossy finish and Best Protection is desired
• DRIVEWAYS, SIDEWALKS, SLABES, PATIO, STONE, BRICK, MASONRY, WALLS,
Features/Benefits
• Very low odor • Excellent cure and durable seal
• Anti-Spall • Perfect for interior or exterior projects
• Use on Pavers, Concrete, Stone, Masonry
Technical Information
Material Properties @75°F (24°C) 50% RH
Packaging
DIAMOND PLUS ANTI-SPALL WB is packaged in 5 gallon pails (18.9L) and 1 gallon (3.79L) containers.
Shelf Life
1 year in original unopened container.
Specification/ Compliances
ASTM C 309, TYPE 1, 1D & II CLASS A and B AASHTO M 148 TYPE 1 & 1D CLASS A & B
ASTM C 1315 TYPE 1, 1D & II CLASS A USDA COMPLIANT
ASTM D 523 GLOOS 80 NCHRP 244 SERIES II & IV
ASTM D 2801 LEVELING ASTM D 3153 RECOAT ABILITY
Property Result
Viscosity 40 to 100 cp
Solids content ASTM D 2369 37%
VOC content 88 g/L
Water retention ASTM C 156 < 0.40 kg/m2
Initial dry time 1 hour
Recoat time 2 to 4 hours
CURING & SEALING DIAMOND PLUS ANTI-SPALL WB MASTER FORMAT 03 39 23
Coverage
Application ft2/gal (m2/L)
Cure/seal new concrete 200 to 300 (4.9 to 7.4)
Seal/dustproof old concrete 300 to 400 (7.4 to 9.8)
NCHRP 244/ASTM 309 150 (3.7)
The coverage rates are approximate and for estimating purposes only. Make test applications on actual surfaces to determine exact
coverage rates. Heavy applications, application in cool, cold, or humid conditions, or prolonged exposure to moisture may cause
DIAMOND PLUS ANTI-SPALL WB to be milky-white appearance. Follow all application instructions carefully.
Directions for Use
Surface Preparation, Existing Concrete: Surface must be structurally sound, clean, free of dust, dirt, laitance, efflorescence,
curing compound, paint, oil, grease and other contaminants. Prior to application, surface defects, voids, cracks and joints
should be properly treated and repaired. Concrete may be damp, but must be free of standing water. If acid has been
used to clean the surface, neutralize the surface prior to using DIAMOND PLUS ANTI-SPALL WB. Always test surface pH to
insure all acid has been neutralized prior to application.
Freshly Placed Concrete: Horizontal surfaces must be finished and show no surface “sheen” from bleed water.
Mixing: DIAMOND PLUS ANTI-SPALL WB requires stirring or agitation prior to use. Thoroughly mix
Diamond Plus Anti-Spall WBTM before applying or loading into application equipment.
Application: Apply DIAMOND PLUS ANTI-SPALL WB in an even, continuous film by sprayer, short-napped roller or brush.
Use an applicator pad or roller to pick up puddles or excess material from the surface. For a more uniform appearance,
especially over decorative concrete, it is recommended to back-roll the product after spraying. A second coat may be
applied depending upon the desired surface gloss. When applying to fresh concrete, a delay of 24 hours is recommended
before application of the second coat. If the delay between the first and second coat results in the contamination of the
surface, the surface must be thoroughly cleaned before the application of the second coat. When using DIAMOND PLUS
ANTI-SPALL WB to seal existing concrete, a second coat may be applied as soon as the first coat has dried 2 to 4 hours at
75°F (24°C). The surface porosity and the amount of surface sheen desired determines the selection of material for the
second coat. The sealed concrete can usually be opened to foot traffic in 8 to 12 hours, with maximum sealer durability
developed within 7 to 10 days. A light maintenance coat is recommended every 1 to 2 years depending on the concrete’s
exposure to traffic, abrasion, weathering, etc.
If using Sprayer: Strain material with a filter sock while pouring into spray unit. Water based materials splash and dry
on the bottom of the closed pail lid and fall back into the liquid and may clog spray tip if not strained.
Clean-Up
Clean up tools and equipment, overspray and drips with hot, soapy water. Dried product is very difficult to remove.
Precautions/Limitations
• DIAMOND PLUS ANTI-SPALL WB meets the tile adhesive bond requirements of ASTM 1315. However, an on-site
test is recommended to verify that the specific adhesives to be used on a project will adequately bond to DIAMOND
PLUS ANTI-SPALL WB.
• Store between 50°F - 90°F (10°C - 32°C). Do not allow to freeze.
• Application temperature range is 45° - 95°F (7° - 35°C).
• Do not apply DIAMOND PLUS ANTI-SPALL WB to frost-filled or frozen surfaces.
• Heavy applications, applying in cool or cold weather, or prolonged exposure to moisture may cause this product to
have a milky appearance.
• High humidity conditions and very hot/windy days will adversely affect drying and performance of this product.
• Do not apply if rain or heavy fog is likely within 8 to 12 hours after application.
• Before applying DIAMOND PLUS ANTI-SPALL WB to the entire surface, test a small area to verify appearance on the
substrate.
• Do not use on glazed surfaces or over ceramic tile.
• The sealer may slightly darken the surface and highlight surface imperfections.
• In all cases, consult the Safety Data Sheet before use. WARRANTY: STONE MOUNTAIN CONCRETE SOLUTIONS, LLC (“SMCS”) solely and expressly warrants that its products shall be free from defects in materials and workmanship for one (1) year from the date of purchase.
Unless authorized in writing by an officer of SMCS, no other representations or statements made by SMCS or its representatives, in writing or orally, shall alter this warranty. SMCS MAKES NO WARRANTIES, IMPLIED OR
OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. If any SMCS product fails to conform with this warranty, SMCS will replace
the product at no cost to Buyer. Replacement of any product shall be the sole and exclusive remedy available and buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made within
one (1) year from the date of the claimed breach. SMCS does not authorize anyone on its behalf to make any written or oral statements which in any way alter SMCS’s installation information or instructions in its product
literature or on its packaging labels. Any installation of SMCS products which fails to conform with such installation information or instructions shall void this warranty. Product demonstrations, if any, are done for illustrative
purposes only and do not constitute a warranty or warranty alteration of any kind. Buyer shall be solely responsible for determining the suitability of SMCS’s products for the Buyer’s intended purposes.